Have a look how good a Wrangler JK can be when you equip it with parts from Offroad-Express.

Teraflex 4” Elite Lift kit Prerunner Long Flexarm

Teraflex Elite LCG PreRunner System combines all of top-of-the line components into a set that will allows you for off-road driving at high speeds. Suspension limiting straps and SpeedBump Stops prevent any potential damage to drivetrain or suspension by maximizing down travel safely. Additional brackets beef up critically weak areas and prevent potential damage in areas that are prone to damage at high speed.

Falcon Shocks Series 3.4 with remote adjust

Falcon JK/JKU Series 3.4 Remote Air Adjust Piggyback Shock Absorbers feature a two-position Remote Air Adjust Switch to adjust damping settings soft or firm from inside of the car.

FTeraflex High Steerer System Complete Kit

The TeraFlex High Steerer System addresses all of the front-end steering issues associated with JK Wrangler and JKU Wrangler Unlimited models with 4”+ lift kits by maintaining proper steering geometry for superior highway drivability.

Fox 2.0 Performance ATS Adjustable Steering Stabilizer

Derived from the FOX's original ATS stabilizer, the Performance Series 2.0 Stabilizer TS utilizes a Through Shaft (TS) architecture that eliminates shaft fluid displacement throughout the stabilizer's entire travel in both directions. By eliminating fluid displacement, the TS design delivers neutral and consistent damping of unwanted steering feedback. The result is unrivaled steering control at an unbelievable price point in a single, bolt-on stabilizer.

Teraflex Front Big Brake kit with Slotted Rotors

The TeraFlex Front Big Brake Kit is a must for Wrangler models requiring increased braking performance with oversized – and heavier – wheels and tires. This simple bolt-on upgrade doesn’t require cutting, welding, or adapters.

Teraflex Rear Performance Big Rotor Kit

The TeraFlex Rear Performance Slotted Big Rotor Kit is an affordable upgrade for JK Wrangler and JKU Wrangler Unlimited models, a must when using oversized – and heavier wheels tires. This simple bolt-on upgrade doesn’t require cutting or welding.

DRAKE OFF ROAD RACING HOOD HOLD DOWN

Replace your boring rubber hood hold downs with these race inspired Drake Off Road hood hold downs, featuring a billet aluminum turnbuckle and stainless steel heim joints

SMITTYBILT STINGRAY VENTED HOOD

Smittybilt’s SRC Stingray vented hood is an product that will not only give your JK a more aggressive look but also keep your engine temperature cooler.

POISON SPYDER FRONT VENTED INNER FENDERS

Poison Spyder Vented Inner Fenders dress up the look of your front wheel wells with beautiful CNC laser cut, bead-rolled and brake-formed aluminum panels with stainless steel mesh vented inserts to promote airflow through the engine bay.

Poison Spyder JK Rear Inner Fenders

Poison Spyder JK Rear Inner Fenders are the best looking, best functioning aftermarket rear inner fenders for your Jeep Wrangler.

POISON SPYDER FRONT ALUMINUM WIDE CRUSHER FLARES

Extra-Wide Crusher Flares are designed for those Jeepers who need extra tire coverage to satisfy local laws, or who simply want to keep more dirt and mud from flinging up onto the Jeep due to wide wheels and tires

POISON SPYDER REAR ALUMINUM WIDE CRUSHER FLARES

Poison Spyder's Rear Crusher Flares are precision-fabricated replacements that are built to handle extreme terrain. Extra-Wide Crusher Flares provide approximately 2" more tire coverage than stock flares.

ELECTRIC SIDE STEPZ PLUG N' PLAY RUNNING BOARDS

Electric Side StepZ will make getting in or out of the car easy especially when your ride is lifted. Steps perfectly match the car line when folded and the reliable folding mechanism will work in any given conditions to make your life easier.

Poison Spyder Bruiser Front Bumper

The Bruiser is a grille-width, high clearance bumper with recessed winch mounting. Fabricated from 3/16" plate steel, with a low profile, high clearance design for optimum off-road performance.

Poison Spyder Bruiser Front Skid

The JK Bruiser Front Skid attaches to the bottom of Bruiser Series front bumpers to conceal the stock "crash bar" and protect the electronic swaybar disconnect motor found on Rubicon JK's.  

Poison Spyder Bruiser Rear Bumper

The Bruiser™ Rear Bumperis combines hard core off-road performance with full features such as a fortified reciever hitch, high clearance recovery shackles and recessed backup light buckets

Poison Spyder Frame Mounted Tire Carrier

The Poison Spyder Frame Mounted Tire Carrier is engineered for strength, ease of use and bad-ass looks. It fits up to a 40" tire and works with the stock bumper or most aftermarket rear bumpers.

Smittybilt X20 GEN2 WIRELESS REMOTE WINCH With SYNTHETIC ROPE

The Smittybilt X2O Winch have been enhanced in almost every area for increased performance and trouble free operation. Completely sealed and waterproof and like all X2O winches covered by the Smittybilt Lifetime Warranty.

Poison Spyder Aluminum Hawse Winch Fairlead

The Poison Spyder Aluminum Hawse Fairlead will help protect your synthetic winch line during winch operation, as well as give the front of your 4X4 a little bit of Poison Spyder attitude. CNC machined from billet aluminum and powder coated for a durable finish.

FACTOR55 FLAT LINK WITH TITANIUM PIN & RUBBER GUARD

We have eliminated the conventional winch hook and replaced it with a safer and stronger FlatLink shackle. The FlatLink shackle mount is the Industry’s first folding shackle mount for recovery winches.

SUNTOP FASTBACK BOWLESS ROOF COVER

Roof and windows run separately, so you can have 5 different configurations of your top; from fully open to completely closed. The roof can be rolled up on the top of your windshield, secured by two latches, leaving your trunk free for your luggage. Very easy to open and to close.

J.W. SPEAKER 8700 Carbon Evolution J2 Series LED HEADLIGHTS

A high performance 7” round Jeep LED headlight offering dual-burn® high & low beam optics. This technology combines your high and low beam when turning on your high beam, providing the driver with both widespread visibility along with a powerful punch of light down the road.

J.W. SPEAKER LED Turn Signals – Model 239 J2 Series

Designed specifically for Jeeps, the Model 239 J2 Series offers plug & play installation as well as a smoked lens option for those looking for that true “blacked-out” look.

Rigid Radiance POD LED LIGHTS with RED Back light

Unique lighting solution that offers Rigid's legendary quality at a level everyone can attain. A compact cube similar to Rigid's popular D-Series, the Radiance Pod features independently controlled back-lighting.

RIGID A-PILLAR MOUNT KIT

These brackets use existing mounting bolts - no drilling or cutting required. They will give your JK a clean, from-the-factory look and allow for vertical adjustment of the beam.

RIGID RADIANCE PLUS 50” LED BAR with RED back light

Rigid Radiance LED bar is feature-packed, with a black exposed printed circuit board, optimized forward projecting Broad Spot optics which combine the attributes of a spot and flood beam pattern, and back-lighting for that awesome looks.

RIGID WINDSHIELD MOUNT KIT for 50” LIGHT

This Jeep mount kit for led light bars are specifically designed to install a Rigid Industries 50" led light bars over the windshield of your Jeep JK using the existing mounting points on the A-pillars - no drilling or cutting required.

RIGID D-SERIES PRO SPOT LED LIGHT

The D-Series has always been the most versatile compact lighting package on the market today. RIGID has just made it professional grade with the D-Series PRO, which offers more light output than ever before thanks to recent advancements in LED technology. Available with a variety of mounting options. Those Lights in our JK are mounted inside front and rear bumpers.

RIGID A-SERIES RED LED LIGHT

A-Series LED Accessory Light might be small, but it packs a punch and is extremely versatile. The A-Series accent lighting solution includes multiple mounting options and is available in multiple LED colors. We choose the red ones for the good looks. Check the galery for how it turns out.

RIGID LED Tail Lights – Model 279 J Series

Model 279 J Series offers off-road lighting both style and function! One-of-a-kind look incorporating a contoured housing, innovative light blade technology and “blacked out” styling with easy plug and play installation.

RIGID CHASE REAR LED LIGHT

The RIGID Chase rear facing LED light adds safety and functionality by packing reverse, courtesy, strobe, running, and brake lights into a single compact package.

ARB On board Air Compressor

The compact ARB compressor provides the right performance to run one or two air locks.

Smittybilt G.E.A.R Tailgate Cover

Complete the look and get organized. Manufactured from 600 Denier Polyester and designed to match the rest of the G.E.A.R. line.

Daystar Lower Switch panel

Daystar Switch Panels make adding switches for electrical accessories easier than ever before! A direct replacement for factory dash components.

Daystar A-pillar Switch pod with rocker switches

The A-Pillar switch panel puts access right at your fingertips all while keeping rocker switches out of the way from the dash and shifter. Pre-molded cut outs are designed to fit four switches.

XD Wheels Grenade Alloy Wheel 20”

Wheel Pros Anti-theft Lug Nuts 1/2"